18
Flow Chart
The following chart shows the general flow of operation, from preparation to
actual use of the communication and Internet functions.
Set the Communication Function
Set the mode dial to [
] (Setup mode) and set the
communication function. You will need the information supplied by
the provider or system administrator. → P.19 “Chapter 2”
Connect the Communication Equipment
Connect the camera to the communication equipment. There are
various ways of doing this. Choose the connection method best
suited to the environment. → P.55 “Chapter 3”
Preparations are now complete.
Follow the procedures below to actually use the communication function.
Send a captured Image
Set the mode dial to
(Play mode) and upload an image. There
are various ways of doing this. Choose the upload method best
suited to your purpose. → P.63 “Chapter 4”
When you want to use more various functions ...
Use the Communication and Internet Functions
Set the mode dial to (Communication mode) to use the
communication and Internet functions. As well as sending images,
you can receive images and use a variety of Internet functions. →
P.83 “Chapter 5”
➜➜ ➜➜
