Connecting the Machine
32
1
Settings Required to Use Network TWAIN Scanner
This section lists the settings required for using TWAIN Scanner under the net-
work environment.
Ethernet
This section lists the settings required for using network TWAIN Scanner with
Ethernet cable.
For details about how to specify the settings, see “Interface Setting”.
Note
❒ In [Effective Protocol], check that the protocol you want to use is set to [Effec-
tive].
❒ [LAN Type] is displayed when the wireless LAN interface board is installed.
When both Ethernet and wireless LAN (IEEE 802.11b) are connected, the se-
lected interface takes precedence.
Reference
p.54 “Interface Settings”
Menu User Tool Setting Requirements
Interface Setting/Network Machine IPv4 Address Necessary
Interface Setting/Network IPv4 Gateway Address As required
Interface Setting/Network DNS Configuration As required
Interface Setting/Network DDNS Configuration As required
Interface Setting/Network Domain As required
Interface Setting/Network WINS Configuration As required
Interface Setting/Network Effective Protocol Necessary
Interface Setting/Network LAN Type Necessary
Interface Setting/Network Ethernet Speed As required
Interface Setting/Network Permit SNMPv3 Communictn. As required
Interface Setting/Network Permit SSL/TLS Comm. As required
Interface Setting/Network Host Name As required
