122
Setting the Date and Time
(DATE SETTINGS)
You can take still images with the time or date stamped onto the
picture.
The date/time setting on the SETUP menu is explained here.
1. Display the setup menu.
For detailed operation, see P.111.
2. Press the " button to select
[DATE SETTINGS] and press the $
button.
3. Press !"#$ to set the year,
month, date and time.
If you hold down the ! or " button, you
can increase/decrease the value quickly.
4. In [FORMAT], choose the date and
time format.
5. Check the display on the bottom of
the screen and then press the
M/O button.
Once you have set the date and time,
the display returns to the Setup menu.
Note
• If the batteries are removed for more than one week, the date and time settings will be lost.
These settings must be made again.
• To retain the date and time settings, load a fully charged battery for more than two hours.
