7
❖ IP-Fax Settings
❖ Administrator Tools
Function name Description
Enable H.323 Specify whether or not H.323 is used for IP-
Fax transmission.
Enable SIP Specify whether or not SIP is used for IP-Fax
transmission.
H.323 Settings Set the IPv4 address or host name of gate
keeper, and alias telephone number.
SIP Settings Set the SIP server's IPv4 address or host
name, and SIP user name.
Program / Change / Delete Gateway Register, change, or delete the gateway used
for transmission to IP-Fax.
Function name Description
Program / Change / Delete Standard Mes-
sage
Use this function to program standard mes-
sages to be printed at the top of the first page
of the original.
Store / Change / Delete Auto Document You can program, change, or delete pages
stored as auto documents.
Program / Change / Delete Scan Size You can program, change, or cancel fre-
quently used sizes.
Print Journal
The Journal allows you to check a maximum
of the last 50 communications (receptions and
transmissions) performed by the machine.
Transmission Page Count This function allows you to check the total
number of pages transmitted and received.
Forwarding This function allows you to have documents
printed on the machine, and sent to a speci-
fied End Receiver.
Memory Lock RX When you switch Memory Lock on, received
documents are stored in memory and not
printed automatically.
ECM
If part of a transmission fails because of a line
problem, the lost data is automatically resent.
Parameter Setting User Parameters allow you to customize var-
ious settings to suit your needs.
Program Special Sender By programming particular receivers as Spe-
cial Sender in advance, you can have Special
Senders treated differently.
Box Setting The following functions are for delivery and
transfer of documents: Personal Box, Infor-
mation Box, Transfer Box.
