2
Getting Started
31
4 Close the card cover, and
slide it in the direction of 4.
u Caution
• Do not remove the memory card while the card access lamp
is lit.
• If the card cover is opened while the power is on, the camera
will turn off. Do not open the cover while the camera is in use.
• Use this camera to format (initialize) a memory card that is
unused or has been previously used on other devices. (p.33)
• Use a high-speed memory card when recording movies.
If a write speed cannot keep up with a recording speed,
the writing may stop during recording.
t Memo
• For details on how the data is recorded when two memory
cards are inserted, refer to “Memory Card Settings” (p.37).
• When using an Eye-Fi card or a Flucard, refer to “Using a
Wireless Memory Card” (p.80).
Turn the camera on and make the initial settings
1 Turn the main switch to [ON].
The first time the camera
is turned on after purchasing,
the [Language/W] screen
appears.
t Memo
• The power will automatically turn off when you do not perform
any operations within a set period of time. (Default setting:
1min.) You can change the setting in [Auto Power Off]
of the D3 menu.
1 Use ABCD to select the desired language
and press E.
The [Initial Setting] screen
appears in the selected
language.
Proceed to Step 6 if F
(Hometown) does not need
to be changed.
2 Press B to move the frame to F and press D.
The [F Hometown] screen appears.
3
4
Initial Settings
Turning the Camera On
Setting the Display Language
Initial Setting
Settings complete
Cancel
English
New York
Text Size
Standard
e_kb502_om.book Page 31 Monday, October 14, 2013 4:14 PM
