5
86
Settings
A memory card with a built-in wireless LAN “Eye-Fi card” (Wi-Fi
transmission) or a “Flucard” compatible with this camera can be
used. By using these cards, images can be transferred from
the camera to a computer or other device via wireless LAN.
Select the camera action when using an Eye-Fi card or
a Flucard.
1 Select [Wireless Memory Card] in D3 menu
and press D.
The [Wireless Memory Card] screen appears.
2 Select [Action Mode].
The items that can be set are
displayed according to
the type of card inserted.
Eye-Fi card
Flucard
3 Select Y or Z for [Auto Resize].
When set to Z, JPEG images are saved to the Eye-Fi card
or Flucard at the size of r.
4 Press F twice.
u Caution
• When an Eye-Fi card or a Flucard is not inserted, the camera
action cannot be set.
• Set up a wireless LAN access point on a computer for the
card connection.
• When using a Flucard, update it to the latest firmware before
use.
• For RAW images, the success of transfer depends on
the specifications and settings of the Eye-Fi card in use.
• Images may not be transferred when the battery level is low.
• It may take time to transfer a large number of images.
The camera may turn off if the internal temperature of the
camera becomes high.
• For precautions on the Eye-Fi card, refer to “About Eye-Fi
Cards” (p.112).
Using a Wireless Memory Card
D3
AUTO
Transfers images automatically when there are
any images that have not yet been transferred.
Only movies with a size of 2 GB or less can be
transferred.
SELECT
Transfers images or folders that are selected
in [Eye-Fi Image Transfer] of the playback
mode. (p.64)
Only JPEG and RAW images can be
transferred.
OFF Stops the communication function.
Wireless Memory Card
Action Mode
Auto Resize
Communication Info
Firmware Info/Options
Automatically transfers
unsent images from memory card
unsent images from memory card
Cancel
OK
ON Enables wireless data transfer with Flucard.
OFF Disables wireless data transfer with Flucard.
e_kb558_om.book Page 86 Tuesday, September 16, 2014 11:59 AM
