3
41
Shooting
1 Turn the mode dial to select the desired
exposure mode.
V appears on the status screen
for the value that can be
changed.
The value that can be changed is
underlined in the viewfinder.
During Live View, D appears for
the value that can be changed.
2 Turn V.
In K/L mode, press J to
select the value to be changed.
t Memo
•
The settings for exposure can be specified in increments of 1/3
EV steps. In [1 EV Steps] of the
E
1 menu, you can change the
adjustment steps to 1/2 EV steps.
• A proper exposure may not be obtained with the selected
shutter speed and aperture value when the sensitivity is set
to a certain sensitivity.
•In L mode, the difference from the proper exposure is
displayed on the EV bar scale while exposure is adjusted.
•In M mode, [Drive Mode] cannot be set to [Continuous
Shooting] or [Exposure Bracketing].
• You can set the function of the M button for when the camera
is in L/K mode. Set in [Button Customization] of the A4
menu. (p.75)
• When shooting with a low shutter speed, you can reduce
image noise from the control panel or [Slow Shutter Speed
NR] of the A2 menu.
1/1/
3030
100100
FF
4.54.5
9999999999
1/
30
F4.5
100
99999
Auto
Applies Noise Reduction according to the shutter
speed, sensitivity, and internal temperature of the
camera.
On
Applies Noise Reduction when the shutter speed is
slower than 1 second.
Off
Does not apply Noise Reduction at any shutter
speed.
Checking the Depth of Field (Preview)
When [Optical Preview] or [Digital Preview] is assigned to M
in [Green Button] of [Button Customization] in the A4 menu,
you can check the depth of field before taking pictures.
(p.73)
