6
ASSEMBLY
T
o hire an authorized service technician to assemble the treadmill, call toll-free 1-800-445-2480.
Assembly requires two persons. Set the treadmill in a cleared area and remove all packing materials; do not
dispose of the packing materials until assembly is completed. Note: The underside of the treadmill walking
belt is coated with high-performance lubricant. During shipping, a small amount of lubricant may be transferred to
the top of the walking belt or the shipping carton. This does not affect treadmill performance. If there is lubricant
on top of the walking belt, simply wipe off the lubricant with a soft cloth and a mild, non-abrasive cleaner.
Assembly requires the included hex keys and your own Phillips screwdriver and
rubber mallet .
Use the drawings below to identify the assembly hardware. The number in parentheses below each drawing is
the key number of the part, from the PART LIST near the end of the manual. The number after the parentheses
shows the quantity needed for assembly.
Note: If a part is not in the parts bag, check to see if it is preat-
tached to one of the parts to be assembled. Extra hardware may be included. To avoid damaging plastic
parts, do not use power tools for assembly.
1. Make sure that the power cord is unplugged.
With the help of a second person, carefully tip
the treadmill onto its left side as shown. Partially
fold the Frame (58) so that the treadmill is more
stable.
Do not fully fold the Frame yet.
Insert an Extension Leg (89) into the base of the
right Upright (84). Hold an Extension Leg Nut
(67) in the bottom of the Extension Leg, and fin
-
ger tighten a 2 1/4" Extension Leg Bolt (92) into
the top of the Extension Leg. Next, finger tighten
a 2 1/2" Extension Leg Bolt (65) into the bottom
of the Extension Leg.
Firmly tighten the
Extension Leg Bolts.
Slide a Front Endcap (44) onto the base of the
right Upright (84). Finger tighten a Front Endcap
Screw (14) into the Front Endcap and the base.
89
58
44
84
92
14
67
1" Tek Screw (83)–2
Extension Leg Nut (67)–2
Screw (3)–2
Handrail Bolt (64)–4
5
2 1/2" Extension Leg Bolt (65)–2
2 1/4" Extension Leg Bolt (92)–2
Front Endcap
Screw (14)–2
1
65
