16
22. Place the treadmill near the coaxial cable from
your wall (or device). Connect the coaxial cable
to the Upright Coaxial Cable (122).
Press the Right Base Cover (83) and the Left
Base Cover (not shown) onto the Base (94) until
they snap into place.
21. With the help of a second person, hold the TV
assembly near the console assembly, and con-
nect the wires.
Attach the TV assembly to the back of the con-
sole assembly with four 1/4" x 3/4" Screws (116).
Be careful not to pinch any wires. Start all
four Screws, and then tighten them.
TV Assembly
Wires
Console
Assembly
122
83
94
116
22
21
23. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the oor or carpet, place a mat under the treadmill.
Note: Extra hardware may be included. Keep the included hex keys in a secure place; one of the hex keys is
used to adjust the walking belt (see pages 39 and 40).
