A SERVICE OF

logo

10
7. Attach the Base Cover (84) to the Base (94)
with four #8 x 1/2" Screws (1). Be careful not
to overtighten the Screws.
W
ith the help of a second person, tip the tread-
mill down so that the Base (94) is flat on the
floor.
8
4
94
1
1
1
7
8. Identify the Right and Left Upright Covers (86,
87).
Slide the Right Upright Cover (86) onto the
Right Upright (83) as shown. Then, slide the Left
Upright Cover (87) onto the Left Upright (82).
82
87
86
83
8
1