Chapter 12-Network Services
12-36
Using IPv6 Networking Addresses for RMX Internal and
External Entities
IPv6 addresses can be assigned to both RMX (Internal) and External Entity
addresses.
RMX Internal Addresses
Default Management Network Service
• Control Unit
•Signaling Host
• Shelf Management
• MPM1 (Media Card)
• MPM2 (Media Card)
External Entities
• Gatekeepers (Primary & Secondary)
•SIP Proxies
•DNS Servers
• Default Router
• Defined participants
IPv6 Guidelines
• Internet Explorer 7™ is required for the RMX Web Client and RMX
Manager to connect to the RMX using IPv6.
• IPv6 is supported with MPM+ media cards only.
• The default IP address version is IPv4.
• Internet Explorer 7™ is required for the RMX Web Client use an IPv6
connection to the RMX.
• The IP address field in the Address Book entry for a defined participant
can be either IPv4 or IPv6. A participant with an IPv4 address cannot
be added to an ongoing conference while the RMX is in IPv6 mode
nor can a participant with an IPv6 address be added while the RMX is
in IPv4 mode.
An error message, Bad IP address version, is displayed and the New
