A SERVICE OF

logo

VC-412 User’s Manual
17
3.4.3 SNMP Trap Receiver Table
The SNMP Trap Receiver Table is a set of user-defined addresses that belonged to the
SNMP Trap server. When enabled (entered addresses, 4 receivers maximum) the
VC-412 will send out SNMP information to the trap clients. Currently the VC-412 offers 6
Trap Conditions in addition to port information and counters. The 6 trap conditions are:
1. Unit Up (Power On and Check Status OK)
2. Unit Down (Error or Power Off)
3. Port Link Up (RJ-11 Plugged-in and Link LED is On)
4. Port Link Down (RJ-11 is not plugged and Link LED is Off)
5. Trunk Port Up (RJ-45 is linked and Link/ACT LED is On)
6. Trunk Port Down (RJ-45 is not linked and Link/ACT LED is Off)