The page includes the following fields: table 4-18 description of the IGMP Snooping Status.
• Item
Description
• VLAN ID
Identifies a VLAN and contains information about the Multicast group
configuration.
• Querier
Display the current status of IGMP Querier on the device.
Active – The IGMP Query function had been enabled on the device and played
as a main Querier within a subnet domain. Within a network domain,
there will be only one IGMP Querier. While two or more Querier exist,
only one Querier operation by election.
The Querier will transmit a IGMP Query packet about every 125 secs.
Idle – The IGMP Querier function had be enabled but might be at the initiation
status, or there’re already other Querier exist.
• Queries
transmitted
Statistics of IGMP Query packets transmitted from the VLAN. Only the “IGMP
Querying Enabled” be checked, the counter is active.
• Queries received
Statistics of IGMP Query packets received at the VLAN –from another switches or
routers.
• V1 Reports
Statistics of IGMP V1 report packets received at the VLAN.
(Packets with content type = 0x12 ; The Membership Report (version 1))
• V2 Reports
Statistics of IGMP V2 report packets received at the VLAN.
(Packets with content type = 0x16 ; The Membership Report (version 2))
• V3 Reports
Statistics of IGMP V3 report packets received at the VLAN.
• V2 Leaves
Statistics of IGMP V2 leave packets received at the VLAN.
(Packets with content type = 0x17 ; Leave a Group (version 2))
Table 4-18 Description of the IGMP Snooping Status
-47-
