FGSW-2620VM / FGSW-2624SF User’s Manual
Hash Algorithm Provide MAC address table Hashing setting on Switch; available options are
CRC Hash and Direct Map.
Default mode is CRC-Hash.
Save button
Press the button to complete the configuration.
4.1.2 IP Configuration
User can configure the IP Settings and DHCP client function, the screen in Figure 4-1-3 appears.
Figure 4-1-3 IP configuration screenshot
Object Description
DHCP Client
"Enable" is to get IP from DHCP server. "Disable" is opposite. The DHCP
client function only works if you haven't assigned a static IP address that
different than the switch default IP. Once the default IP has been changed
the DHCP will not effective and the switch will continue using the manually
entered static IP. If you have changed the switch to a static IP address, you
can set the IP address back to its default IP address or you can reset the
Switch back to factory default. And then you can enable the DHCP client
function to work.
IP Address
Assign the Switch IP address.
The default IP is 192.168.0.100.
Subnet Mask
Assign the Switch IP subnet mask.
Gateway
Assign the Switch gateway.
The default value is 0.0.0.0.
Apply button
Press the button to complete the configuration.
25
