CAMERA SELECT
The DVR-400 provides 4 camera inputs. Please use channel buttons on the front panel to select specified
channel for real-time display.
Please use “SELECT” button or “CHANNEL” buttons for different combinations for channel display.
Example:
a) When you choose (----), all cameras are off
b) When you choose (1234), video content in all cameras will be displayed.
c) When you choose (1---), only the content of channel 1 will be displayed.
In “EACH” mode, you can use the following buttons to display Full-screen
format of each channel.
Channel 1 button: Full screen display of channel 1
2 button: Full screen display of channel 2
Channel 4 button: Full screen display of channel 4
Channel 3 button: Full screen display of channel 3
Ø CAMERA SELECT 1 - - -
RECORD SELECT 1 - - -
RECORD MODE EACH
RECORD FRAMERATE 30
VIDEO QUALITY MORRMAL
RECORD SCHEDULE
SUB MENU
HARD DRIVE SETUP
SENSOR SETUP
NETWORK SETUP
PRESS (Ù,Ú), THEN (SELECT)
PRESS (MENU) TO EXIT
Note
Channel Display Control
In ”EACH
” mode, you can use the following buttons to display
Full-screen format of each channel.
Note
While no video connection or connection failure,
“VIDEO LOSS” signal will be displayed, and the built-
alarm buzzer will be triggered to sound.
