89
Advanced Setup
EXPERT
Assigning the Component Video Inputs
This receiver has three component video inputs. By default they act as video inputs for the DVD/LD, TV
and SAT functions, but you can reassign them if you want to use them as video inputs for other receiver
functions. For example, if you have a DVD recorder connected to the VCR1/DVR jacks and want to use its
component video output, and you're not using the COMPONENT VIDEO IN 3 jacks on this receiver, you
can reassign the input from SAT to VCR1.
See pages 16–19 for more on connecting equipment using component video cords.
1
Turn on the receiver and your TV,
press RECEIVER on the remote
control.
2
Press the SYSTEM SETUP button.
3
Looking at the on-screen display on
your TV, use the 5∞ buttons to
select INPUT ASSIGN. Press the
ENTER button.
4
Use the 5∞ buttons to select
C'NENT VIDEO IN then press ENTER.
5
Use the 5∞ buttons to select the
component video input you want to
reassign.
In the example above, we would select C'NENT-IN 3.
6 Use the
2 3
buttons to assign a
receiver function.
Choose between DVD/LD, TV, SAT, VCR1 and VCR2.
In the example above, we would select VCR1
7
When you're finished use the 5∞
buttons to select RETURN and press
ENTER.
You will leave the "Assigning the Component Video
Inputs" mode.
8
Use the 5∞ buttons to select
RETURN and press ENTER, again.
Then, use the 5∞ buttons to select
EXIT and press ENTER.
3
4
1.Input Assign
[ 1.Digital-In Select ]
[ 2.C'nent Video In]
[Return]
1.2. C' nent Video In
C' nent-In1 [DVD/LD ]
C' nent-In2 [ TV
]
C' nent-In3 [ SAT ]
[Return]
5
memo
System Setup
[ Auto Surround Setup ]
[1. Input Assign ]
[2. Surround Setup]
[3. Expert Setup]
[4. THX Audio Setup]
[Exit]
1.2. C' nent Video In
C' nent-In1 [ DVD/LD ]
C' nent-In2 [ TV ]
C' nent-In3 [ VCR1 ]
[Return]
6
If you connect any source component to the
receiver using a component video input, you
should also have your TV connected to this
receiver's component video output.
OFF
S0URCE TV
MULTI CONTROL
SYSTEM RECEIVER
DVD/LD
TV SAT
TV CONT
VCR1/
DVR
VCR2 VIDEO
MULTI
OPERATION
CD
DIMMER
CD-R/
TAPE1
TUNER
RECEIVER
1
INPUT ATT
2
LOUDNESS
3
SPEAKER A/B
4
VIDEO SEL
5
SIGNAL SEL
6
TAPE 2
DIRECT ACCESS DISP MODE
– +
+
10 DISC
ENTER
7
EFFECT/CH SELL
8
TONE
9
BASS/TREBLE
0
SYSTEM SETUP
TUNER EDIT
MENU
REMOTE SETUP
STATUS
MPX
GUIDE
EXIT
RETURN
ENTER
¶
TUNING
–
DTV ON/OFF
TUNING
+
8
EXTRA MENU
BAND
SETUP
1
2
3-8
