ENGLISH
C 3 Remove the seal off the cleaning cartridge.
NOTE: ONLY USE PHILIPS NORELCO
SMARTCLEAN CARTRIDGE WITH THE
SMARTCLEAN SYSTEM.
◗ When the cleaning cartridge filter is full, the
replacement symbol blinks indicating the
cleaning cartridge should be replaced. See
'Replacing the SmartClean System Cartridge'.
C 4 Place the cleaning cartridge in the
SmartClean System.
C 5 While holding the SmartClean System with
one hand, gently push the top part of the
SmartClean System back down. You will
hear a 'click'.
When the SmartClean System is ready for use,
do not move appliance to prevent leakage.
Cleaning the Shaver in the
SmartClean System
C ◗ SmartClean System has two phases: a cleaning
phase and a drying phase.
◗ If the shaver does not contain enough power
for one (1) shave, the SmartClean System
27
14_S9531_S9311.indd 27 12/15/14 2:41 PM
