Quick Programming (cont’d) 41
5
Press the Number 2/STOP+ or Number 5/STOP– button
to set the recording’s stop time. Every time you press a button,
the stop time changes in one-minute increments. If you press and
hold a button, the stop time changes in 30-minute increments.
6
Press the SPEED button to select the tape speed (SP or
SLP). Details about tape speed are given below.
4
Press the Number 1/START + or Number 4/START–
button to set the recording’s start time. Every time you
press a button, the start time changes in one-minute increments. If
you press and hold a button, the start time changes in 30-minute
increments.
Instructions continue on page 42.
ONE TIME PROGRAM
PROGRAM 1
CHANNEL +/– 12
START +/– 08 : 00 PM
STOP +/– – – : – – AM
REC SPEED SLP
DATE +/– – – /– – /– –
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
ONE TIME PROGRAM
PROGRAM 1
CHANNEL +/– 12
START +/– 08 : 00 PM
STOP +/– 10 : 00 PM
REC SPEED SLP
DATE +/– – – /– – /– –
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
ONE TIME PROGRAM
PROGRAM 1
CHANNEL +/– 12
START +/– 08 : 00 PM
STOP +/– 10 : 00 PM
REC SPEED SLP
DATE +/– – – /– – /– –
SET DAILY=8 OR WEEKLY=9
TO END PUSH EXIT
5
4
6
Cassette type / Playback Time
Tape Speed T160 T120 T60
SP (standard play) 2 hrs.
2 hrs. 1 hr.
40 mins.
LP (long play) 5 hrs.
4 hrs. 2 hrs.
(playback only) 20 mins.
SLP (super long play)
8 hrs. 6 hrs. 3 hrs.
Tape Speeds
This chart shows the recording/playback time for
T160, T120, and T60 video cassettes. There are
three playback speeds: SP, LP, and SLP. This VCR
will play tapes recorded in LP, but LP will not
appear on the display panel. This VCR will record
only in SP and SLP.
