— 5 —
17 ¡ (Fast forward) / 3/OK
button
Before using this button, press VCR.
• After pressing VCR:
– Fast forwards the tape. Also during
playback, starts rapid forward
visual search. (✈P.14)
– Selects the items on the menus or
goes to the next menu screen when
using the menus. (✈P.11 )
18 STOP 7 /
∞∞
∞∞
∞ button
• Stops the tape. (✈P.14)
• Moves down the cursor when using
the menus. (✈P.11 )
19 SLOW/FORWARD + button
During a slow motion picture, adjust the
playback speed in the forward direction.
(✈P.16)
20 MENU button
Before using this button, press VCR.
• After pressing VCR, calls up the
main menu. (✈P.11 )
21 TIMER button
Display the Timer Recording menu.
(✈P.17)
22 Number buttons
(0, 1, 2, 3, 4, 5, 6, 7, 8 and
9)
Before using these buttons, press VCR.
• Press to select a channel on the VCR.
To select channels 1 to 9, press 0
then the channel you want. For
example, for channel 4, press 0 then
4.
• Also used to programme the Timer
Recordings. (✈P.17)
23 CLEAR button
Erases unwanted timer programmes.
(✈P.18)
24 AUDIO/MUTE button
For some Philips TV only:
Turns off the TV sound.
25 INDEX 4 / ¢ buttons
Locates an index marked at the
beginning of every recording. (✈P.15)
To insert the batteries:
1 Remove the battery compartment lid
from the bottom of the remote
control.
2 Install two batteries —R6(SUM-
3)/AA — matching polarity
indicated inside the battery
compartment.
3 Replace the lid.
CAUTION
On Battery Replacement
Do not mix old and new batteries.
(Also never mix alkaline batteries
with manganese batteries.)
Note:
This remote control and batteries are
supplied accessories.
Check to make sure they are included.
Also, check “Specifications” to see what
other accessories are included.
VR388/588-55 EN (N) 6/1/99, 9:01 AM5
