14 Philips PPF 685 · 695
EN
Redial list: Press and hold @ (at least two seconds). Use
[ to select an entry from the list of the dialled numbers.
Caller List:
1 Press [, and using [
CALLS select PERSON-
ALIS.
.
2 Confirm with OK.
3 Using [, select from which list you would like to dial
a number.
4 Confirm with OK.
5 Select the desired number using [.
Adjusting volume level
Looking up Numbers
Looking up Numbers
During a call, you can look up the telephone book entries.
1 During a call, press ô
Menu.
2 Use [ to select
PHONEBOOK.
3 Using [, dial the desired entry.
Previous menu
Calling additional telephone func-
tions
Function is not supported in all countries and n etworks
(Function is not supported in all countries and
networks)
Additional telephon e functions
You can use additional telephone functions with your de-
vice for example call on hold, three-way call or forwarding.
Contact your telephone company to inquire whether or
not these functions are available for your connection. The
signal to the switchboard to call these services is a short line
interruption (Hook Flash). Press the R key to call the ad-
ditional telephone functions.
On the Device
Making a Second Call
1 During a call, press R.
2 Enter the desired number using the numeric keypad or
select a saved entry.
Switching Between Calls
Switching Between Cal ls
Press R, to toggle between the calls.
Receiving a Second Call
Call Waiting
During a call, you can be informed about another call by a
notification tone (= call waiting) if your telephone compa-
ny offers this service. The notification tone for call waiting
on the device is switched off in the factory.
Receiving a Second Call
During a call, press R to accept the new call.
CLIP Prerequisite
Switching notification tone for call waiting on/
off
1 Press OK, 42 and OK.
2 Use [, to select whether you would like to turn the
call waiting on or off.
3 Confirm using OK.
On the cordless telephone
Receiving a second call
During a call, press ô ACCEPT to accept the new call.
Switching between calls (= hold)
2: Call waiting
1 During a call, press ô Menu.
2 Using [ select
SWITCH.
3 Confirm with OK.
Making a second call
Dialling another number
1 During a call, press ô Menu.
2 Dial using [
SECOND CALL.
3 Enter the desired number using the numeric keypad.
4 Press ô
Call.
1: Ending a call
Hands-free
On the device
1 Pressß to dial without lifting up the handset. You will
hear a dial tone from the loudspeaker.
2 Enter the desired number using the numeric keypad or
dial a saved entry. The dialling process begins immedi-
ately. Any incorrectly entered numbers can no longer
be changed now.
Handset near the device
On the cordless telephone
Low battery charge
Switching on hands-free
1 During a call, press ô Menu.
2 Using [ select
Deact..
3 Confirm with OK.
Switching off hands-free
1 Select Deact. again.
2 Press ô
Deact..
Switching hands-free on/off
You can adjust the volume level of the speaker on the
cordless telephone using [ even during a call.
Press õ
Return to return to the previous menu lev-
el.
Press R, to toggle between the calls.
For this function to work, the caller line identifica-
tion (CLIP) must be activated for your telephone
connection (country and network dependent). The
number and name will not be shown if the caller sup-
presses his number.
Hot key: Press R, to toggle between the calls.
Hot key: Pressõ, and dial the other number.
Hot key: Press õ and 1, to end the call and to ac-
tivate the call on hold.
Put the handset near the device with the microphone
facing up in order to achieve an optimum communi-
cation.
This function is not available if the battery charge of
the cordless telephone is low. Place the cordless tele-
phone into the charging station.
You can switch the hands-free mode on and off by
pressing “ button during a telephone call.
