12 Watching TV
The unit selects available TV channels automatically when you
connect an Antenna or Cable TV signal to it.To reset TV
channels, see page 20.
If you are using a Cable Box or Satellite Receiver, you do not
need to set channels at the TV/VCR/DVD.
1
Press STANDBY-ON to turn on the TV/VCR/DVD.
2
To watch TV, press CH. ▲/▼ to select memorized
channels. Memorized channels are those that appear
when you flip through channels. If a channel is skipped,
you still can use the Number buttons to select it.This
is a non-memorized channel; it may have weak
reception in your area.
To update your memorized and non-memorized
channels, see page 19.
Remember, if you are using a Cable Box/Satellite
Receiver, set the TV/VCR/DVD to channel 3, 4 or
AUX. Change channels at the Cable Box/Satellite
Receiver.
3
Press VOL. ▲/▼ to adjust the volume.
CH.
VOL.
