23
English
Programming the disc tracks
Programming tracks is possible when playback is
stopped. Up to 99 tracks can be stored in the
memory in any order.
IMPORTANT!
It is only possible to program from the
current selected disc tray.
AUX/GAME
VOL
DSC WOOX LEVELVAC
USB PC LINK
M
P
3
1
2
4
7
53
6
1 Load the desired discs on the disc trays (refer to
“Loading discs”).
2 Press CD or one of the CD 1~5 buttons to
select a disc.
3 Press PROGRAM (PROG) to start
programming.
➜ PROG starts flashing.
4 Press í or ë repeatedly to select the desired
track.
● For MP3 disc, press à / á (ALBUM 43) and
í / ë (TITLE -+) to select the desired
album and title for programming.
5 Press PROGRAM (PROG) to store.
● Repeat steps 4–5 to select other tracks.
➜ If you attempt to program more than 99
tracks, “PROGRAM FULL” is displayed.
6 To start program play, press ÉÅ.
7 To stop playback or to end programming, press
Ç once.
➜ PROG stays and the programming mode
remains active.
Notes:
– If the total playing time has reached 100
minutes or one of the programmed tracks has a
number greater than 30, “—:—” is displayed
instead of the total playing time.
– The system will exit the programming mode if
no button is pressed within 20 seconds.
Checking the programme
1 Stop playback and press í or ë repeatedly.
2 Press Ç to exit.
OR
Press ÉÅ to start playback from the current
programmed track
Clearing the programme
● Stop playback, and then press Ç to clear the
programme.
OR
Press the OPEN•CLOSE 0 button of the
disc tray.
➜ PROG disappears and “PROGRAM CLEARED”
is displayed.
Note:
– The program will be erased if the system is
disconnected from the power supply or you switch
to another source mode.
Disc Operations
