Select your network from the list of found networks and confirm.5
Enter the encryption key (if required) and confirm.6
(press CLEAR to delete last character entry /
press hold CLEAR to delete line entry)
The player >
acquires the automatic IP address;
shows the conrmation for the connection to the network;
shows the prompt for the connection to the Internet.
Select [7 Yes] to connect to the Internet.
The player shows the conrmation for the connection to the Internet. >
You can go to section Enjoy and listen to Internet radio at this point.
This icon indicates steps on your remote control!
Here is how to create a wireless connection any time ‘after’ the initial setup:
Ensure that your network name and network password or encryption key are available.1
Turn on the player.2
Turn on your wireless access point or wireless router with broadband Internet access.3
Press 4
SETTINGS, to go to the Settings menu.
Select [5 Wireless (WiFi)] to start the network setup process.
For wireless routers with Wi-Fi protection system (WPS) that supports push •
button configuration (PBC): On the router, press the WPS PBC push button (often
displayed as ) to activate. On NP2900 press OK to confirm.
For wireless routers with Wi-Fi protection system (WPS) that supports a personal •
identification number (PIN): On NP2900 select WPS PIN, then enter the displayed
PIN on the router.
For other wireless routers:•
NP2900 searches for networks. >
np2900_qsg_02_01eng.indd 7 3/20/2009 2:50:54 PM
