48
SETUPS
EN
You can upgrade the software by connecting the unit to
the Internet.
1) Follow steps 1) to 4) in “Connection Test” on page
44.
2) Use [K / L] to highlight “Software Upgrade”, then
press [OK].
3) Use [K / L] to highlight “Network Upgrade”, then
press [OK].
4) Use [K / L] to highlight “Yes”, then press [OK].
• This unit will then start checking for the latest
firmware version.
5) Confirmation message will appear.
Use [s / B] to highlight “Yes”, then press [OK].
• The unit will start downloading the latest firmware
version.
6) When the download completes, confirmation
message will appear. Press [OK].
• The unit will start upgrading the firmware version.
• It may take a while to complete the upgrading.
7) After upgrading finishes, this unit will restart and
open the disc tray automatically.
Initialize the setting, SD Memory Card or network setting.
1) Use [K / L] to highlight “Factory Default” in the
home menu, then press [OK].
2) Use [K / L] to highlight the desired setting, then
press [OK].
“Settings”:
All the settings except for the “Parental” and “Network
Connection” setting will be reset to default.
“Format SD Card” (Available only when an SD
Memory Card is inserted):
Initialize the SD Memory Card.
“Local Storage”:
Local storage for Player or SD Card (Available only
when an SD Memory Card is inserted) used for BD-Java
will be initialized.
“Network Settings”:
Reset the network setting to the default.
3) Use [K / L] to highlight “Yes”, then press [OK].
• Confirmation message will appear. Press [OK] to
complete the setting.
4) Press [BACK U] to go back to the previous screen,
or press [HOME ] to go back to the home menu.
Network Upgrade
HOME A
“Play Disc
Setup”
A “Custom” A“Other” A
“Software
Upgrade”
A
“Network
Upgrade”
Note
• Please do not unplug the AC power cord or LAN
cable while executing the “Network Upgrade”.
• All settings will remain the same even if you upgrade
the software version.
• The disc tray will open automatically after upgrading
finishes. This is not a malfunction.
Reset to Factory Default
Note
• Do not remove the SD Memory Card while executing
the “Format SD Card” or “Local Storage” (SD Card). It
will damage the card.
• “Format SD Card” and “Local Storage” (SD Card) are
not available when a Blu-ray Disc is in the unit.
