• 9 •
English
• (Fig.4) - Place a container under the steam wand (Pannarello).
Open the knob (3) by turning it counter-clockwise.
(Fig.5) - Set the selection knob (17) to the " " position.
• Dispense the whole water tank content from the steam/
hot water wand (Pannarello). To end the operation, set the
selection knob (17) to the "
" position and close the knob
(3) by turning it clockwise.
• (Fig.2) - Fill the tank with fresh drinking water.
• (Fig.13-14) - Insert the lter holder into the brew unit (8)
from the bottom and turn it from left to right until it locks
into place.
• (Fig.15) - Place a suitable container under the lter
holder.
• (Fig.16) - Turn the selection knob (17) to the "
"
position and dispense all the water in the tank.
(Fig.17) - Once the tank is empty, stop dispensing and
switch the selection knob (17) to the "
" position.
• Fill the tank again and wait until the "machine ready" light
(20) turns on.
• (Fig.19) - Remove the lter holder from the unit by turning
it from right to left and rinse it with fresh drinking water.
The machine is now ready; please see related sections for
operating details on how to brew co ee and dispense steam.
5 COFFEE BREWING
Warning! During the co ee brewing it is
forbidden to remove the pressurized lter
holder by manually turning it clockwise. Danger of
burns.
• During this operation, the "machine ready" light (20) may
ash; this is to be considered as a standard and not a faulty
operating mode.
• Before using the machine, make sure that the hot water/
steam knob (3) is closed and that there is enough water in
the tank.
• Press the ON/OFF button (11) and switch it to the "I"
position.
• Wait until the "machine ready" light (20) turns on. The
machine is now ready for co ee brewing.
Accessories for co ee brewing are placed in
a specially designed seat to make operations
easy and immediate.
If the ground co ee measuring scoop and/or the lters
are required, lift the cover (2) and take what you need
(Fig.35 e Fig.36).
5.1 Using Ground Coff ee
• (Fig.7) - Insert the lter (14) in the pressurized lter holder
(12); the lter is already inserted when using the machine
for the rst time.
• (Fig.13) - Insert the lter holder into the brew unit (8) from
the bottom.
• (Fig.14) - Turn the lter holder from left to right until it
locks into place. Release the pressurized lter holder grip.
The handle will slightly turn to the left. This movement
guarantees proper lter holder performance.
• (Fig.16) - Preheat the pressurized lter holder by switching
the selection knob (17) to the "
" position until some
water spills out of it. This is to be done only for the rst
co ee brewing.
• (Fig.17) -When 150cc of water have owed out, set the
selection knob (17) to the "
" position to stop brewing.
• (Fig.19) - Remove the lter holder from the machine by
turning it from right to left and pour out any water left. As
the machine is tted with the special lter (14), there is no
need to change the lter to make one or two co ees.
• (Fig.35) - Remove the measuring scoop from the
machine.
• (Fig.8) - Add 1-1.5 measuring scoop(s) for single co ee
and 2 measuring scoops for double co ee. Remove any
co ee residues from the rim of the lter holder.
• (Fig.13) - Insert the lter holder (12) into the brew unit (8)
from the bottom.
• (Fig.14) - Turn the lter holder from left to right until it
locks into place.
• (Fig.15) - Take 1 or 2 preheated cups and place them
under the pressurized lter holder. Make sure that they are
correctly placed under the co ee brewing nozzles.
• (Fig.14) - Switch the selection knob (17) to the "
"
position.
• When the desired quantity of co ee has been obtained,
turn the selection knob (17) to the "
" position to stop
co ee brewing. Wait a few seconds after brewing has
stopped, then remove the cups of co ee (Fig.18).
• (Fig.19) - Remove the pressurized lter holder and empty
out the remaining co ee residues.
Note: If a small quantity of water remains
in the lter holder, this has to be considered
as absolutely normal and is due to the lter holder
features.
Important Note: The lter (14) should be kept
clean to guarantee perfect results. Clean daily
after use.
