15
English
Basic Functions
Demonstration mode
The system has a demonstration mode that
shows the various features offered by the system.
To activate the demonstration
● In standby mode, press and holdÇon the
system for 5 seconds to switch to
demonstration.
To deactivate the demonstration
● Press and holdÇon the system for 5 seconds to
switch to standby mode.
Switching the system on
● Press STANDBY-ON/ECO POWER (2).
➜ The system will switch to the last selected
source.
● Press CD/USB, TUNER, TAP E (TAPE 1/2)
or AUX.
➜ The system will switch to the selected
source.
● Press OPEN•CLOSE, DISC 1/2/3(CD 1/2/
3) or DISC CHANGE.
➜ The system will switch to the disc source and
the disc tray will open.
Switching the system to Eco
Power Standby mode
● Press STANDBY-ON/ECO POWER (2) in
the active mode.
➜ The system enters Eco power standby (the
ECO POWER LED is on) or normal standby
with clock display.
● If the system is in normal standby with clock
display, press and hold STANDBY-ON/ECO
POWER (2)for 3 seconds or more to
switch to Eco power standby or vice versa.
Dim mode
You can select the desired brightness for the
display.
● In any source mode, press DIM repeatedly to
select DIM 1, DIM 2, DIM 3 or DIM OFF display
mode.
➜ DIM is shown, except for DIM OFF mode.
Volume control
Adjust VOLUME to increase (turn knob
clockwise or press VOLUME +) or decrease
(turn knob anti-clockwise or press VOLUME
-) the sound level.
To listen through the headphones
● Connect the headphones plug to
the n socket at the front of the
system.
➜ The speakers will be muted.
To switch off the volume temporarily
● Press MUTE on the remote control.
➜ Playback will continue without sound and
"MUTE" is displayed.
● To restore the volume, press MUTE again or
increase the volume level.
pg001-pg031_FWM575-Eng-37 2006.2.8, 13:1615
