EN 13
English
8 Other features
Listen to an external device
You can also listen to an external audio device
through this audio system.
For an audio device with a headphone socket:
1 Press MP3 LINK repeatedly to select the
MP3 link source.
2 Connect the supplied MP3 link cable to:
the • MP3 LINK socket on this unit.
the headphone socket on an MP3 •
player.
3 Start to play the MP3 player. (See the
user manual of the MP3 player)
For other audio devices:
1 Press MP3-LINK repeatedly to select the
AUX source.
2 Connect the audio cables to:
the • AUX IN sockets on this unit.
the audio out sockets on the audio •
device.
3 Start to play the device. (See the device
user manual)
Set the sleep timer
This unit can switch to standby automatically
after a set period of time.
1 When the unit is turned on, press SLEEP
repeatedly to select a set period of time
(in minutes).
When sleep timer is activated, the »
display shows
.
2 Press SLEEP repeatedly until “SLP OFF” is
displayed.
When sleep timer is deactivated, »
disappears on the display.
Set the alarm timer
This unit can be used as an alarm clock. The last
selected source is activated to play at a preset time.
1 Ensure that you have set the clock
correctly.
2 Press and hold TIMER for more than 2
seconds.
The hour digits are displayed and begin »
to blink.
3 Press / to set the hour.
4 Press TIMER to confi rm.
The minute digits are displayed and »
begin to blink.
5 Press / to set the minute.
6 Press TIMER to confi rm.
The timer is set and activated. »
To select a source to activate as the alarm
sound:
1 Press DISC , TUN , USB , or MP3 LINK to
select a source.
For DISC: ensure that there is a disc •
in the disc compartment.
For TUNER: tune to radio station.•
For USB: connect a USB device.•
For MP3 LINK/AUX: ensure that the •
external device is connected and
turned on.
2 Press to switch the unit to standby.
Activate and deactivate alarm timer
1 Press TIMER repeatedly to activate or
deactivate timer.
If timer is activated, the display shows »
.
If timer is deactivated, »
disappears on
the display.
Listen through headphone
1 Plug a headphone into the socket on
the unit.
