4.9 Charge accounts
You can allocate separate amounts of money to up to 4 users for external
calls. This so-called charge account is protected by an account code.
Accounts can have names allocated to them.
So that amounts can be entered it is necessary – if the charge information is
transferred in units – to program a factor (see 4.8).
Charge accounts can only be used if the ISDN ”advice of charge” (AOC)
function is available. Set-up is protected by the PIN.
Charge display: Units or amount
In ISDN, charge information can be transferred as units or as amounts of
money.
1. When transfer is performed in units for your ISDN line:
The charge display can be in units (= status on delivery)
or in amounts.
For the display of amounts, the set factor for a unit is used (factor on
delivery: 0.12 DM).
2. If transfer of the charges is performed in amounts, units cannot be
displayed.
Changing over
display
- - - or
- change over display - store settings
- - - -
- enter PIN
Delete factor - enter new factor: maximum 4 digits and a comma
(as decimal point). For the comma:
asterisk key - store entry
Changing the
factor
(on delivery:
0.12 DM)
33
32
A – Telephone operation: 4 Comfort functions
Charge display: Currency
Changing the
abbreviation
for the currency
(on delivery:
”DM”)
- - - -
Delete the abbreviation for the currency - enter abbreviation
store input
A – Telephone operation: 4 Comfort functions
Further accounts
Changing
accounts
Using the same procedure, you can set up a maximum of 4 charge
accounts. To do this, use the cursor keys to select the next unused account.
The accounts can be changed in the same way (e. g. by entering a new
amount).
Switching charge accounts on and off
- Enter account code - dial telephone number
- - - -
- Enter PIN
- (possible display of an amo-
unt)(
delete the possibly existing amount)
Enter account amount: maximum 4 digits and a comma (as decimal
point).
For the comma:
asterisk key - store entry
Enter account name - store entry
Enter account code - store entry
- - - -
- enter PIN
or
Switch on or off - store setting
Setting up charge accounts
Initiating a call for a charge account
With the charge account function switched on, a four-digit account code
must first be entered.
If the account is at zero, no further outgoing external calls are possible. An
existing call can be completed. You can then enter a new amount.
