86
4
Taking Pictures
The procedure for setting the focus manually (\) is described below.
1 Press the four-way controller (5)
in A mode.
2
Use the four-way controller (
5
) to
select
\
and press the
4
button.
The central portion of the image is
magnified to fill the screen of the LCD
monitor when focusing.
3 Press the four-way controller
(23).
The \ indicator appears on the LCD
monitor to indicate the approximate
distance to the subject. Use the four-way
controller (23) to adjust the focus using
the indicator as a guide.
2 : for distant focus
3 : for closer focus
4 Press the 4 button.
The focus is fixed and the camera returns to capture status.
In addition, the focus position is fixed five seconds after you remove
your finger from the four-way controller (5).
After the focus is fixed, you can press the four-way controller (5) again
to display the \ bar and readjust the focus.
•In y mode, the focus mode is set to s.
•In 9 mode, you can only select = and q.
Saving the Focus Mode 1p.104
Manual Focus
To switch from \ to another focus mode, press the four-way
controller (5) while the \ bar is displayed.
Capture mode and drive mode cannot be changed while the \ bar
is displayed.
Focus Mode
Focus Mode
Manual Focus
Manual Focus
OK
OK
OK
OK
OK
OK
38
38
2m
0.5
11
2m
0.5
\ indicator
