195
Changing Additional Settings
8
You can select which function settings to save when the camera is turned
off. The following function settings can be saved.
1
Select [Memory] in the [A Rec. Mode 3] menu, and press
the four-way controller (5).
The [Memory 1] screen appears.
2
Use the four-way controller (23)
to select an item, and use the
four-way controller (45) to
select O or P.
Turn the e-dial to display the [Memory 2]
screen.
3
Press the 3 button twice.
The screen that was displayed before selecting the menu appears again.
Selecting Settings to Save in the Camera
(Memory)
Function
Default Setting
Function
Default Setting
Flash Mode O
Flash Exposure Comp.
O
Drive Mode O Focus Position P
White Balance O Digital Filter P
Custom Image O HDR Capture P
Sensitivity O Playback Info Display O
EV Compensation O File No. O
O
Settings are saved even when the camera is turned off.
P
Settings are cleared and returned to their default values
when the camera is turned off.
• Set [File No.] to O (On) to continue the sequential numbering for the file
name even if a new folder is created. Refer to “Selecting the File Number
Setting” (p.200) for details.
• When [Reset] (p.196) of the [R Set-up 3] menu is performed, all Memory
settings return to the default values.
Memory
Flash Mode
Drive Mode
White Balance
Custom Image
Sensitivity
EV Compensation
Flash Exposure Comp.
MENU
1 2
