216
Changing Additional Settings
7
2
Use the four-way controller (23) to
select an item, and use the four-way
controller (45) to select O or P.
Turn the rear e-dial (S) to display the
[Memory 2] screen.
3
Press the 3 button twice.
The screen that was displayed before selecting the menu item appears again.
O Settings are saved even when the camera is turned off.
P
Settings are returned to their default values when the camera is
turned off.
• In [Shooting Info Display], you can set whether to save the type of information
displayed in standby mode. (p.27)
• Set [File No.] to O to continue the sequential numbering (four digits) for the
file name even if a new folder is created.
• When [Reset] of the [R Set-up 2] menu is performed, all Memory settings
return to the default values. (p.217)
MENU
Memory
Flash Mode
Drive Mode
White Balance
Custom Image
Sensitivity
EV Compensation
Flash Exposure Comp.
1 2
P
The status screen is always displayed first when the camera is
turned on.
O
The display selected from the Shooting Info Display selection
screen (other than [Electronic Compass]) appears when the
camera is turned on.
O
The file number of the last image saved to the previous folder is
saved and subsequent images are assigned sequential file
numbers even if a new folder is created.
P
The file number of the first image saved to a folder returns to 0001
each time a new folder is created for saving images.
e_kb524_84percent.book Page 216 Friday, June 15, 2012 12:13 PM
