3
Shooting
40
1 Press D in standby mode.
The Drive Mode screen appears.
2 Use CD to select O and
press B.
3 Use CD to select O or P and press E.
The camera returns to standby mode.
4 Press the shutter release button halfway fully.
The self-timer lamp blinks.
The shutter will be released about 12 seconds or 2
seconds.
1 Press D in standby mode.
The Drive Mode screen appears.
2 Use CD to select Q and
press B.
3 Use CD to select Q, R or S and press E.
The camera returns to standby mode.
The self-timer lamp blinks.
4 Press the shutter release button halfway.
5 Point the remote control unit towards the remote
control receiver on the front or back of the
camera, and press the shutter release button on
the remote control unit.
tMemo
• The maximum operating distance of the remote control unit is
approx. 4 m from the front of the camera and approx. 5 cm
from the back of the camera.
• To use the remote control unit to adjust the focus, set in [9.
AF with Remote Control] of the E2 menu.
• When using the Remote Control Waterproof O-RC1, the
autofocus system can be operated with the q button. The r
button cannot be used.
Self-timer Shooting
Self-timer (12 sec.)
Cancel
OK
OK
MENU
Remote Control Shooting
Remote Control
Cancel
OK
OK
MENU
