PFC'"
10 Professional MIDI Foot Controller
View
MIDI/
Control
Angle
Remote Voltage
Adjust
OutJcd
Jarits
4.0 REAR PANEL DESCRIPTIONS
1.
Power Supply
Required when using a
5-pin
MIDI
cablewith
MIDIequipment
otherthan
theTube
FexorTransFex
212.
Use
onfy
the
16-16.5
volt AC 1,000
mA
adaptor, Peavey
part#70900660,
available as an option.
Caution:
Use
only
the optional16.5
volt
power supply for this product. If the (optional) power supply must
be replaced, consultan Authorized Peavey Dealer or the factoryforthe correct replacement. Failure
to use the correctpowersupply
could
resultin
fire,shock
hazard,extensive
circuitdamage,decreased
performance, and/or non-operation.
2.
View Angle Adjustment
This adjusts the view
angle
of the LCD display to provide the most comfortable viewing
angle.
3.
MIDI/Remote
Out
Jack
Used when connecting to an effects unit. Use a standard
5-pin
MIDI cable with effects units
other
than
the Peavey Tube
Fex
or
TransFex
212. When using the Tube Fex or
TransFex
212,
use the
8-pin
MIDI cable
provided.This
willallow
you to
usethe
PFClO
ProfessionalMID
Foot
Controller’s
"intelligent"
operation, and it
will
connect the PFC 10 to the Phantom power supplied from the Tube Fex or
TransFex
212.
4.
Control Voltage Jacks
The
CC6jacktransmits
Controller 6 when used with a CV
pedal
or potentiometer. Use the
CC7jackto
transmit Controller
7
(volume) when used with a CV pedal or potentiometer.
Peavey Electronics Corporation
