A SERVICE OF

logo

Open as PDF
next previous
15
MAKING ADJUSTMENTS IN THE SETUP MENU
The Setup menu is organized in this order:
Rename Inputs
→
Theater Bypass
→
Input Level Offsets
→
Phones Level Offset
→
Bass Management
→
Limit Volume
→
Zhd Input Assign
→
Factory Reset
Press the
Setup button
Setup button
to step through each of these functions. Pressing the
Enter button
will
access the selected setup option. Pressing the
Exit Setup button
Exit Setup button
will step back a menu level or
exit the Setup menu.
Rename Inputs
You can change the name of each input here. For example, you might prefer Input 2 to show
“
CD Player
” instead of the factory default name “
In 2
.” Any input can have a custom name up
to 14 characters long.
Press the Enter button on the remote control to begin renaming your inputs.
•
Press the VOL Up or VOL Down buttons to select a
new character. Upper and lower case letters, numbers
and many symbols are available.
•
Press the BAL Right button to modify the next character.
•
Press the BAL Left button to modify the previous character.
•
After you’ve renamed this input press the Enter button
to start renaming the next input.
•
After you fi nish renaming inputs, press the Exit Setup button
to return to the main Setup menu.
Theater Bypass
This setup option allows
In 9/Multi 1
or
In 10/Multi 2
to function as bypass inputs. This
means they will pass the signals from the corresponding 7.1 channel inputs directly to the 7.1
channel output, bypassing all P 7 volume, tone and trim controls. Bypass Yes (on) is only used
when the P 7 multichannel input jacks are connected to a surround sound receiver with its own
volume control. For more information about hooking up a component using the bypass mode,
see page 11.
WARNING:
Do not select Bypass “Yes” for an input which is connected to a source
WARNING: Do not select Bypass “Yes” for an input which is connected to a source WARNING:
component such as a DVD player.
Since the P 7 Theater Bypass mode provides no volume
Since the P 7 Theater Bypass mode provides no volume
control, the sound level would be very high and could damage your speakers
control, the sound level would be very high and could damage your speakers
. The Theater
Bypass mode is suitable
only
only
for source components which have their own volume controls!
only for source components which have their own volume controls!only
Press the Enter button to set the Theater Bypass option for In 9/Multi 1.
•
Press the VOL Up or VOL Down buttons to select
Bypass Yes or No for In 9/Multi 1.
•
Press the Enter button to set In 10/Multi 2.
•
Press the VOL Up or VOL Down buttons to select
Bypass Yes or No for In 10/Multi 2.
•
After you fi nish, press the Exit Setup button to return
to the main Setup menu.