- 11 -
Power Tools on Board Cord Hook Cord Length Motor Protector
120V AC(60Hz)
Yes Yes 20 Ft. (6,1 m) Yes
FEATURE CHART
Diagrama de características
Tableau des caractéristiques
- 34 -
Voltaje Herramientas Sujetador Extensión Protector
incluídas del cordón de cordón de motor
120 V AC(60 Hz)
Si Si 6,1 m (20 pi) Si
Alimentation Accessoires Crochet de Cordon Protecteur
rangement d’alimentation du moteur
du cordon
120 V AC(60 Hz)
Oui Oui 6,1 m (20 pi) Oui
The hose located on the back of the
vacuum cleaner carries the dirt from the
nozzle up to the dust bag. If the hose
should become clogged:
➢➢
Unplug vacuum.
➢➢
Press two tabs and pull open suction
inlet and check for clogging.
➢➢
Disconnect hose from short hose and
check the hose for clogging.
➢➢
Plug in vacuum cleaner and turn on.
➢➢
Stretch hose in and out to remove
clog.
➢➢
If clog still exists, turn vacuum
cleaner OFF and UNPLUG PO
WER
CORD.
➢➢
Remove lower plate.
➢➢
Remove short hose from nozzle by
lifting straight up.
➢➢
Inspect hose end and clear any
obstructions.
➢➢
Reinstall short hose.
➢➢
Reinstall lower plate.
