Using a Cellular Phone with this Unit
For assistance, please visit http://www.panasonic.com/phonehelp 59
Ringer tone
You can change the ringer tone heard
when a cellular call is received. You can
change it for the handset and base unit
individually.
1 {MENU} (center of joystick) i f
i {SELECT}
2 “Ringer for cell” i {SELECT}
3 “Ringer tone” i {SELECT}
4 Select the desired item. (Default: “Tone
3”) i {SAVE} i {OFF}
Note:
LIf you erase a customized ring for
cellular call, “Tone 3” (default) is used
instead of that ringer tone.
1 {MENU} i f i {SET}
2 “Ringer for cell” i {SET}
3 “Ringer tone” i {SET}
4 Select the desired item. (Default: “Tone
3”) i {SET} i {STOP}
Selecting which unit to ring ^
You can select which handset or base unit
rings when you receive a call from one of
the registered cellular phones.
1 Press the desired CELLULAR SELECT
button ({1} to {5}).
2 “Assign Base/HS” i {SET}
3 Select the desired unit, then press {>}.
(Default: “All”)
LThe selected units are indicated by
“Q”.
LTo cancel a selected unit, press {>}
again.
4 {SET} i {STOP}
Answering system settings for
cellular calls ^
Setting the answering system for a
cellular call
This feature allows the base unit to answer
cellular calls when you are not available to
answer cellular calls.
Important:
LTo use this feature, you need to turn on
the answering system.
LIf this feature is turned on, the base unit
plays the greeting message and
message is recorded.
1 {MENU} i A i {SET}
2 “TAD for cell” i {SET}
3 “TAD (cell)” i {SET}
4 Select the desired setting. (Default:
“Off”) i {SET} i {STOP}
Note:
L“TAD” stands for Telephone Answering
Device.
Handset
Base unit
TH111(e).book Page 59 Thursday, June 8, 2006 10:35 AM
