A SERVICE OF

logo

Open as PDF
next previous
2. Preparation
20
2.2 Turning the power switch ON
Turn the power switch to the ON position (1).
2.3 Dialling mode
Important:
L Not available when “Australia” or “New
Zealand” is selected in feature #114 on page 63.
If you cannot dial (page 44), change this setting
according to your telephone line service.
1 {Menu}
2 Press {#}{1}{2}{0} to display “Dialling Mode”.
3 Press {1} or {2} to select the desired setting.
{1} “Pulse”: For rotary/pulse dial service.
{2} “Tone” (default): For tone dial service.
4 {Set}
5 Press {Menu} to exit.
1
{Set}
{Menu}