7. Programmable Features
43
Code #78: Changing the TEL/FAX delayed
ring setting
TEL/FAX RING
RINGS=2 [±]
If you use an extension telephone in TEL/FAX
mode, select the desired number of times the
extension telephone rings before the unit
answers the call. You can select “1”, “2”
(default), “3”, “4”, “5”, “6”, “7” “8” or “9”. See
page 33 for details.
Code #79: Setting toner save feature
TONER SAVE
=OFF [±]
“ON”: The toner cartridge will last longer.
“OFF” (default): Deactivates this feature.
Note:
L This feature may lower the print quality by
reducing toner consumption.
Code #80: Resetting advanced features to
their default settings
SET DEFAULT
RESET=NO [±]
To reset the advanced features:
1. Press {MENU}.
2. Press {#}, then {8}{0}.
3. Press {A} or {B} repeatedly to select “YES”.
4. Press {SET}.
5. Press {SET} again.
6. Press {MENU}.
7.4 Direct commands for
programming features
You can also select the desired setting by directly
entering the program code (# and a 2-digit
number) and direct command.
For more details on the features, see page 40 to
page 43.
1 Press {MENU}.
2 Press {#} and the 2-digit code number.
3 Press the desired direct command to display
the desired setting.
L This step may be slightly different
depending on the feature.
4 Press {SET}.
5 To exit programming, press {MENU}.
7.4.1 Program code and direct
command button
{#}{0}{1} Date and time
L Enter the date and time using the dial
keypad. See page 17 for details.
{#}{0}{2} Your logo
L Enter your logo using the dial keypad. See
page 18 for details.
{#}{0}{3} Your fax number
L Enter your fax number using the dial keypad.
See page 19 for details.
{#}{0}{4} Sending report
– {1}:“ON”
– {2}:“OFF”
– {3}:“ERROR” (default)
{#}{0}{6} FAX ring count
– {1}:“1”
– {2}:“2” (default)
– {3}:“3”
– {4}:“4”
– {5}:“5”
– {6}:“6”
– {7}:“7”
– {8}:“8”
– {9}:“9”
{#}{1}{2} Remote activation ID
– {1}:“ON”
– {2}:“OFF” (default)
FL613HK-PFQX2156ZA-en.book Page 43 Friday, January 7, 2005 5:54 PM
