A SERVICE OF

logo

Section 700-Operation Appendix A. EX 1.0 Feature Update
DBS-2.3/9.2-700 DBS Manual - Revised April 2000 Page A-35
Modification to T1 Signaling Types
Description
The default values for T1 Incoming and Outgoing Signal Types have been
changed to set “Wink Start” as the default. This will allow easier
programming of E&M trunks.
Outgoing Signaling Type
Programming
See Section 400 - Programming (Appendix C) for more detailed
programming information.
Incoming Signaling Type
Programming
See Section 400 - Programming (Appendix C) for more detailed
programming information.