Using Your Product
4
Using Your Product
5
6
Plug the power cord into a standard household
120/127-volt, 60 Hz. AC outlet. You are now ready
to start.
Using the AUTOMATIC Programs
1 Press the POWER button. All the lights blink on
briefly, and you will hear a greeting sound. The
POWER light stays on, meaning the product is
ready to use.
2 Choose a recipe from the recipe section of this
manual or use one of your own.
3 Put the ingredients into the jar.
4 Make sure the lid and feeder cap are on.
5 Press one of the programmed AUTO FOODS or
AUTO DRINKS buttons appropriate for your
recipe. A selection light confirms your choice
and the START/STOP light will blink.
6 To change your selection, press another button.
Cont’d. next page
Before you use the product for the first time, separate
the lid, feeder cap and blades from the jar. Wash in
warm, soapy water. Rinse and dry well.
Assembly
1 Check to ensure the sealing ring is properly
seated in the channel surrounding the triple
blades.
2 Turn the jar upside down.
3 Turn the triple blades upside down and twist them
into the bottom of the jar. You can use the feeder
cap as a tool to twist the blades securely in place.
Be sure the triple blades are locked securely to
the jar before using.
4 Wrap the power cord around the cord storage
area on the base of the blender until the cord is
the length you desire.
5 Slide the jar onto the base.
