22
How to Use The Memory Function
This monitor has a memory function to store up to 90 measurement results.
When you push the MEMORY button, the monitor displays the measured values
together with the date and time.
For the 91st measurement and onward, the measured values are deleted
from the oldest one.
To delete all the stored data, use the Setting Mode.
If the monitor is set to OFF in the Setting Mode, the monitor does not store
the measured values.
• The measured values are retained in memory even after the batteries are
removed for battery replacement.
1. Push the MEMORY button.
The latest measured values that are stored in
memory are displayed with the mark.
2.
Check the memory.
Each time you push the button, the latest
measured values are displayed. If you push the
button, the screen moves backward
to the previous one.
• If you push the button while the latest
measured values are being displayed, the
oldest measured values are displayed.
• If you push the GRAPH button during the
memory display, you can see the measured
values of one week (including the called out
measured values) in graph display. If you
push the MEMORY button again,
the screen returns to the memory display.
3. Push the START/STOP button to turn off the power.
Date and
Time of
Measurement
