A SERVICE OF

logo

Open as PDF
next previous
4
2. Preparation
2.1
Installing/Replacing the Batteries
1. Remove the battery cover.
1) Push the hook on the bottom of the battery cover.
2) Pull the cover off the main unit.
2. Insert two 1.5V “AAA” alkaline (LR03)
batteries as indicated in the battery
compartment and then replace the
battery cover.
Notes:
• If the battery low symbol ( ) appears on the display, turn
the unit off then replace both batteries at the same time.
• The measurement values continue to be stored in memory even after the batteries are
replaced.
Disposal of used batteries should be carried out in accordance with the national regulations for
the disposal of batteries.
1
2
HEM-6200-E_D_M_main.book 4 ページ ２０１１年１０月３日　月曜日　午後６時２５分