Operating Your Printer 2 – 3
Release and then press the TOF SET button to
record the position, then reselect the printer by
pressing the SELECT button.
17.1 character per inch can be selected by holding
down the TOF SET button when switching the
printer supply on.
SELECT Indicator: Works together with the SELECT button. Lights
when the printer is selected (ready to receive
data from the computer). It is not lit when the
printer is deselected or during self tests. If an
abnormal status is detected during the self test,
the indicator flashes.
FORM FEED Button: Pressing this button advances the paper to the
top of the next page, as set by the TOF SET
button. NLQ (Near Letter Quality) print can be
selected with this button by holding it down
whilst switching on the printer supply.
ALARM Indicator: Lights when paper runs out (unless the alarm
disable command has been used). Printing stops
until the paper supply is replenished. It also
lights if a jam is detected whilst using the CSF. It
also flashes if high temperatures are detected in
the printhead or space motor. Allow the printer
to cool down before re-using.
LINE FEED Button: Advances the paper one line when the printer is
deselected. A demonstration page illustrating
the print styles available on your printer can be
generated by holding down this button whilst
switching on the printer supply. When the
demonstration page is completed, the printer
will automatically revert to 10 cpi Utility mode.
An example of this printout is on the next page.
