Overview
Quick Start
|
E-31
7 Check the Settings
Set the Power Save Delay & Quiet
Mode
The Power Save Delay and Quiet Mode settings save energy
and provide quieter operation when the printer is not printing.
However, when these settings are engaged and a print job is
received, the printer must warm up before printing.
!
For more information, see Adjusting the Warm-up
Cycle under Printer Menus in the Printer Control
section of the User’s Guide.
Factory settings: Power Save Delay = 5 minutes, Quiet Mode
= ON.
Select the Language for the Front
Panel Display
The printer comes set for front panel display in English. To
change it to another language:
1 Press ON LINE.
Printer goes off line.
2 Press and hold MENU 1/Menu 2 until PRINT MODE
appears on the display.
3 Press MENU 1/Menu 2 repeatedly until LANGUAGE
appears on the display.
4 Press ENTER.
5 Press
ᮣᮣ
ᮣᮣ
ᮣ
/Reset repeatedly until the language you want
appears on the display.
6 Press ENTER.
An asterisk appears next to the language.
7 Press ON LINE.
The printer saves the new setting and exits the menu.
