14
IV. Connecting the EZ Port to the
Essentia amplifier (Fig. 3)
When the EZ Port is installed in the wall the only part
visible should be the faceplate and a single RJ-45 jack.
The supplied pre-terminated network cable can then be
plugged into the jack on the EZ Port and into the net-
work connection on the back of the Essentia amplifier,
Any Cat-5 cable terminated using 568A or 568B net-
work wiring will suffice should you need a longer con-
nection.
V. Attaching Audio Source
Equipment to the Essentia
Amplifier (Fig. 4)
Each piece of audio source equipment is connected to
the Essentia amplifier with standard stereo RCA
cables. Attach the RCA cable to the corresponding
audio output on the source equipment and to the
desired source input on the back of the Essentia ampli-
fier.
Fig. 3
Fig. 4
EXT. MUTE
