22
Specifications
Specifications
Model PSW8
Driver Complement
8" injection-molded TCC (talc, carbon and
ceramic-filled polypropylene) woofer, custom
debris screens, high BL magnet structure with
vented pole piece
Design Principle
Infinite baffle for large and varying air volumes
Recommended Amplifier Power
Ten to one hundred fifty watts per channel
Impedance
8 Ohm - single subwoofer in stereo
4 Ohm - single subwoofer with voice coils
paralleled for full monophonic output
Frequency Response
35 Hz to 140 Hz, plus or minus 3dB
(on axis)
Sensitivity
89 decibels for 2.83 volts of pink noise,
measured at 1 meter on axis
Overall Exterior Frame Dimensions
10-3/16” x 14-1/4”
Depth Behind Wall
3-3/4” (assumes 1/2” drywall)
Wall Cut-Out Dimensions
9-1/8” x 13-1/8”
Wiring Requirements
We recommend 16 to 18 gauge for up to
80 feet, 14 gauge for up to two hundred
feet. Connectors accommodate 12 to 18
gauge wire.
