Niles Audio OS63SIBLACK Manual

A SERVICE OF

next previous

ChECkING LOUdSpEAkER phASE

Loudspeaker wire has two conductors. On both your receiver (or ampliﬁer) and each set of

loudspeaker binding posts, one conductor is attached to the negative (–) terminals, while the other

is attached to the positive (+) terminals. Usually, the wire is marked for your convenience, but the

marking can be done in the following different ways:

 

 

 

 

Of course, there are some wires that appear completely identical. So be careful, or you might make

a connection mistake. If you do, the woofer on the OS loudspeaker will not sound as loud or will

lack bass. If you suspect the sound is not right, or you cannot see any markings on the wire, try

this simple test:

  

  

  



  

  

  

16