load
Film
---------
Turn the power switch on and load OX-coded film. With OX-coded film, film
speed will be set automatically (ISO 25-5000). When the camera back is
closed, the film automatica
ll
y advances and the number of available
exposures is displayed
in
the LCD panel.
.....................................................
1
Turn
the power switch
on
, open the camera back by sliding
the camera back lock release lever and load film.
2
------
• Film cartridge can be loaded smoothly if inserted from the bottom.
• Make sure to insert the film cartridge all the way
in.
Pull film leader across to
red
index mark.
~
X
• Make sure to align the film leader to the
red
index mark; if the
fi
lm leader
is
not
properly aligned to the index mark (short of
or
beyond the mark), film may not be
loaded properly.
• Hold the film cartridge and ensure
fi
lm
is
properly positioned with no slack.
NOTE
:
Loading/removing
film
Shutter curtains
are
very thin. Do not touch the shutter curtains
with your finger
or
the film leader.
20
