A SERVICE OF

logo

© National Instruments Corporation 5 cFP-21xx Quick Start Guide
Mounting the Backplane on a Panel
1. Fasten the panel-mount plates to the back of the cFP-BP-x using a
number 2 Phillips screwdriver and the 8-32 × 5/16 in. countersink screws
shipped with the kit.
Caution Do not use screws longer than 5/16 in. to fasten the
panel-mount plates to the backplane.
NATIONAL
INSTRUMENTS
102 mm
(4 in.)
457 mm (18 in.)