English
3-3. Useful Functions
Adjustment Lock
Use the “Adjustment Lock” function to prevent any accidental changes.
Locked function
• Settings in the ScreenManager
Unlocked function
• BrightRegulator function
• Adjusting the brightness by the right control button
• Switching the input signal by the left control button
• Turning the power on and off by the Power button
[To lock]
(1) Switch off the monitor’s power by the Power button.
(2) Press on the Enter button while switching on the monitor’s power.
[To unlock]
(1) Switch off the monitor’s power by the Power button.
(2) Hold down the Enter button once again and turn the power back on.
Off Timer
The off timer function causes the monitor to automatically enter a power off state after
a predetermined amount of time has lapsed. This function was created to reduce
afterimage (p. 28) characteristics that are particular to LCD monitors when the monitor
screen is left on for a long period without use.
[Procedure]
(1) Select <Off Timer> in the ScreenManager <Others> menu.
(2) Press the right and left buttons to adjust the “On Period” (1 to 23 hours).
[Off timer system]
PC Monitor Power Indicator
On Period (1H - 23H) Operation Blue
Last 15 min. in "On period" Advance Notice
*1
Blue Flashing
"On period" expired Power off Off
*1
To delay entering the “Power Off” mode, press the Power button during the advance notice
period. The monitor will continue to operate for an additional 90 minutes.
[Procedure]
Press the Power button to return to a normal screen.
NOTE
• The off timer function works while the power-save setup is active, but there is no
advance notice before the monitor’s power is switched off.
3. ScreenManager
17
